Photo/Drawing with Values Measurement

Top

Applications

Functions

FAQ

Download

Manual

Photo/Drawing with Values Measurement

Placing measured values on a photograph or drawing image

This function lets you place measured values on a user-selected photograph or image and save the results.
When dealing with numerous measurement locations, for example when measuring insulation resistance, it lets you create a report while making measurements.

The function lets you group together drawings and measured values.

Example uses

Insulation resistance measurements made during annual inspections

Site photos and drawings with measurements written on them become a report.

Maintaining a solar power system

Reports can be prepared as measurements are taken.

Instantly and accurately reporting on failure state

Multiple measurements can be placed on a photo.

Look at example use article tags and place automatically.

Insulation resistance measurements made during annual inspections
Easily aggregate results into a report.

Features

First, load a photograph or drawing image.

First, load the photograph or drawing image onto which you wish to place measured values. There are three ways to load images:

Take a photograph.
Take a photograph of the measurement target with the camera on your smartphone or tablet.
Load an image from your photo library.
Transfer a photograph or drawing to your smartphone or tablet in advance and then load that.
Use a template.
To be explained later.

Take a photograph of the measurement target.

The app can load BMP, JPG, PNG and PDF images with a resolution of up to 3,072 × 3,072 pixels.

Tapping the image to place measured values

When you tap the image, the app will stand by for measured value input.

When measured values are sent from the instrument via Bluetooth^® communications, they will be placed on the image.

Up to 1,000 values can be placed on a single image.

Measured values are placed on the image.

Templates

Sometimes you need to repeat the same measurement.

One example of such an application would be measuring the insulation resistance of a distribution panel on a regular basis, such as during an annual inspection.

If you were to take a picture of the distribution panel each time and place the values on that image, you’d need to repeat the same process every year.

Instead, you can create a template by placing measurement points in advance on a photograph.

You can subsequently use this template to eliminate the need to take the photograph and place the measurement points, allowing you to complete the job simply by entering measured values.

Operation

Photograph/drawing measurement function operating manual

Specifications

Number of simultaneous instrument connections	1
How to acquire a drawing	Launching the camera: Take a photograph using the camera and use it as the drawing. Select from library: Select an image that you’ve saved on your device. Image formats: Bitmap (BMP), JPEG (JPG), PNG, PDF Maximum image size: 3072px × 3072px Template: Select from saved templates.
Templates	Drawings on which measurement points have been placed Number that can be created: 10
Measured values	Display refresh interval: Approx. 1 s. Maximum number of displayed channels 1 channel Tap the [Measure] button or press the instrument’s [HOLD] button to finalize the measured value.
Measured points	Tap the drawing to generate a measurement point. Display color: Red: Measured value not registered; Green: Measured value registered Maximum number of points: 1000 points Movement Tap and hold to move.
Zoom in and out on a drawing	Zoom in and out by pinching in and out. From 1× to 20×
Manual input mode	Enter measured values using the numeric keypad instead of an instrument. Measured values: 0.00 to 999999.00, with up to 2 decimal places Unit: Up to 6 characters Unit prefix: Select from 9 types: f ( $10^{-15}$ ) ~ T ( $10^{12}$ )
Other functionality	Instrument selection: Change the connected instrument. Edit work equipment information: Re-edit work information. Re-acquire drawing: Change the drawing. Select whether to keep or delete measurement points. Dark mode: Darken your device’s screen before saving measured values (to reduce the effect of your device’s backlight when measuring illuminance). Continuous measurement: App automatically focuses on the next measurement point after saving a measured value. Measured value display selection: Switch between “number and measured value,” “measured value only,” and “number only.” Rotate drawing clockwise/counterclockwise: Rotate the drawing. Measurement point coordinates are retained. Change measured value size: Change the display size of measurement points.